- Ammonia as a Hydrogen Carrier: What Role Can Ceramic Materials Play? Catalysis, Porosity, Regeneration and Technical Transferability
Camargos Macieira, Priscilla; Liersch, Antje
101. DKG Jahrestagung / 101st DKG Annual Meeting (Hrsg). Keramik 2026. Universität Augsburg. 2026
- Development of selfdisinfecting ceramic surfaces using UV-emitting upconverter materials
Fillinger, Clemens; Schmidt, Christiane; Werner, Jan et al.
101. DKG Jahrestagung / 101st DKG Annual Meeting (Hrsg). Keramik 2026. Universität Augsburg. 2026
- Optimization of Commercial CIM ZrO2 For Hybrid MEx?AM Printing–Milling Process
Clemens, Frank; Bock, Johanna; Montakhab, Elham et al.
101. DKG Jahrestagung / 101st DKG Annual Meeting (Hrsg). Keramik 2026. Universität Augsburg. 2026
- Additive Manufacturing of Fiber-Reinforced
Zirconia-Toughened Alumina Ceramic Matrix
Composites by Material Extrusion-Based Technology
Hadian, Amir; Duckek, Jannis; Parrilli, Annapaola et al.
Advanced Engineering Materials. 2024
- Crack Formation in Pre-Debinded Alumina Using Low-Energy VAT Photopolymerisation
Schulz, Josef; Liersch, Antje
99. DKG-Jahrestagung in Höhr-Grenzhausen (Hrsg). Höhr-Grenzhausen. 2024
- Analysis of pore morphology in oxide electroceramics by automatic image analysis
Schuster, Alexander; Schulz, Josef; Fischer, Simon et al.
Practical Metallography. Bd. 59. H. 5. 2022 S. 251 - 268
- Analysis of the influence of pore morphology and second phase on the dielectric breakdown strength (DBS) of Bayer alumina
Schuster, Alexander; Stolz, Johannes; Liersch, Antje
KERAMIK/Ceramics 2022 : 07.-09.03.2022 ; 97. DKG-Jahrestagung. o. A. 2022
- Artificial intelligence-supported analysis of the porosity of functional ceramic microstructures using optical image segmentation
Schuster, Alexander; Piribauer, Christoph; Stolz, Johannes et al.
KERAMIK/Ceramics 2022 : 07.-09.03.2022 ; 97. DKG-Jahrestagung. o. A. 2022
- Ceramic multi material vat photopolymerization of alumina and zirconia
Schulz, Josef; Emmel, Marcus; Liersch, Antje et al.
KERAMIK/Ceramics 2022 : 07.-09.03.2022 ; 97. DKG-Jahrestagung. o. A. 2022
- Material extrusion additive manufacturing of zirconia parts using powder injection molding feedstock compositions
Hadian, Amir; Fricke, Maximilian; Liersch, Antje et al.
Additive Manufacturing. Bd. 57. Elsevier 2022 S. 102966
- Numerical and experimental investigations on behind armor effects by shaped charges
Göhler, Sebastian; Theile, Florian; Peun, Thomas et al.
32nd International Symposium on Ballistics. 2022
- Material extrusion based additive manufacturing of large zirconia structures using filaments with ethylene vinyl acetate based binder composition
Hadian, Amir; Koch, Leonard; Koberg, Philipp et al.
Additive Manufacturing. Bd. 47. Elsevier 2021 S. 102227
- Debinding and Sintering of Dense Ceramic Structures Made with Fused Deposition Modeling
Clemens, Frank; Schulz, Josef; Gorjan, Lovro et al.
Meboldt, M.; Klahn, C. (Hrsg). Industrializing additive manufacturing : Proceedings of AMPA2020, presented at the AMPA 2020 ; International conference on additive manufacturing in products and applications ; Zürich, Switzerland, September 1-3, 2020. Cham: Springer 2020 S. 293 - 303
- Ethylene vinyl acetate as a binder for additive manufacturing of tricalcium phosphate bio-ceramics
Gorjan, Lovro; Reiff, Lukas; Liersch, Antje et al.
Ceramics International : CI ; the internat. journal of ceramics. Bd. 44. H. 13. Amsterdam: Elsevier 2018 S. 15817 - 15823
- Development of oxygen carriers for chemical looping combustion : effects of support microstructure on the performance of oxygen carriers
Liu, Yujing; Kirchesch, Peter; Remhof, Arndt et al.
Microporous and Mesoporous Materials : zeolites, clays, carbons and related materials ; the official journal of the International Zeolite Association. Bd. 232. H. Juni 2016. Amsterdam [u.a.]: Elsevier 2016 S. 264 - 272
- Development of oxygen carriers for Chemical Looping Combustion : The chemical interaction between CuO and silica/γ-alumina granules with similar microstructure
Liu, Yujing; Kirchesch, Peter; Graule, Thomas et al.
Fuel : the science and technology of fuel and energy. Bd. 186. H. Dezember 2016. Amsterdam [u.a.]: Elsevier 2016 S. 496 - 503
- Development of a silicon-infiltrated silicon carbide (SiSiC) friction layer by the doctor-blade technique using a computer-optimized calculation for the packing density
Seffern, Pascal; Klein, Lee; Tischer, Daniel et al.
Materials Science Forum : 20th Symposium on Composites. Bd. 825-826. H. 4. Zürich: Trans Tech Publ. 2015 S. 264 - 270
- Nanoparticle prepared mechanically stable hierarchically porous silica granulates and their application as oxygen carrier supports for chemical looping combustion
Liu, Yujing; Kirchesch, Peter; Graule, Thomas et al.
Journal of Materials Chemistry A. Bd. 3. H. 22. Royal Society of Chemistry (RSC) 2015 S. 11863 - 11873
- Bulk Ceramic Composites Derived from a Preceramic Polysilazane with Alumina and Zirconia Fillers
Konegger, Thomas; Liersch, Antje; Gierl, Christian et al.
Advanced Engineering Materials. Bd. 15. H. 5. Wiley-Blackwell 2013 S. 394 - 406
- Structure and performance of polymer-derived bulk ceramics determined by method of filler incorporation
Konegger, Thomas; Schneider, P.; Bauer, V. et al.
IOP Conference Series : Materials science and engineering. Bd. 47. H. 1. IOP 2013 012054
- Blue-coloured polymer-derived ceramics? : an investigation
Konegger, Thomas; Halwax, Erich; Zbiral, Johannes et al.
12. Conference of the European Ceramic Society (Hrsg). Stockholm. 2011
- Advanced titania buffer layer architectures prepared by chemical solution deposition
Bäcker, Michael; Brunkahl, Oliver; Kunert, J. et al.
Superconductor science and technology : an Institute of Physics journal. Bd. 24. H. 8. Bristol: IOP Publ. 2011 S. 1 - 7 085018
- Current developments and challenges in the field of polymer derived ceramics
Konegger, T.; Liersch, Antje
Interceram : international ceramic review. Bd. 60. H. 3-4. Düsseldorf: DVS-Verl 2011 S. 226 - 229
- Matrix-filler interactions in polysilazane-derived ceramics with Al²O³ and ZrO² fillers
Konegger, Thomas; Potzmann, Robert; Puchberger, Michael et al.
Journal of the European Ceramic Society. Bd. 31. H. 15. Oxford: Elsevier 2011 S. 3021 - 3031
- Investigation of mechanical properties of polymer-derived Si-C-N/Al2O3-composites with low shrinkage
Konegger, T.; Liersch, Antje
Kaiser, Hans K. (Hrsg). Proceedings of the Junior Scientist Conference 2008. Wien: Technische Univ. Wien 2008 S. 155 - 156
- The Role of Admixed Hexagonal Boron Nitride in Sintered Steels : 1. Effect on Sintering and Microstructure
Liersch, Antje; Danninger, H.; Gierl, C. et al.
Powder metallurgy progress : journal of science and technology of particle materials. Bd. 7. H. 1. Kosice: Inst. of Materials Research SAS 2007 S. 1 - 11
- The Role of Admixed Hexagonal Boron Nitride in Sintered Steels : 2. Effect on Sliding Wear and Machinability
Liersch, Antje; Danninger, H.; Ratzi, R.
Powder metallurgy progress : journal of science and technology of particle materials. Bd. 7. H. 2. Kosice: Inst. of Materials Research SAS 2007 S. 66 - 79
- The Role of Admixed Hexagonal Boron Nitride in Sintered Steels : 3. hBN in Differently Sintered Alloy Steels
Liersch, Antje; Danninger, H.; Ratzi, R.
Powder metallurgy progress : journal of science and technology of particle materials. Bd. 7. H. 3. Kosice: Inst. of Materials Research SAS 2007 S. 149 - 163
- Nitridierungsexperimente zur Herstellung von Precursorkeramiken
Ruess, Gabriel; Schöppl, Oskar; Lengauer, Walter et al.
Innovationen der SKF Österreich AG aus wissenschaftlichen Kooperationen mit Universitäten und Fachhochschulen. 2004 S. 25 - 30
- Polymer precursor ceramics and their applications
Schöppl, Oskar; Ruess, Gabriel; Lengauer, Walter et al.
Innovationen der SKF Österreich AG aus wissenschaftlichen Kooperationen mit Universitäten und Fachhochschulen. Österreich. 2004 S. 17 - 22
